Easy and work project

 Fix broken plastic joint, how it works. My hair steam plastic joint was broken and I need to change the whole part. So I decided to fix it my own way to save my money. All parts to make this fix: Hot glue flat washer Small screws Drill As you can see above picture, the joint is hard to repair by glue because the broken part missing. I need to find something that can do the job. This flat washer is good for the job. Let's see the instruction in the video below.

This page shows you how I install a hot shower at my condominium. However, you need to have basic knowledge about electronics and you will be fine. First step: You need to cut off the circuit breaker before doing this works. Second step: Find the right wire color and meaning of the color. As you can see in the above picture, the ground wire always green in color, and the hot wire is black. Unlike DC current load AC current use black color as a hot wire but DC current use black as a ground. Third step: Check resistance between neutral and ground, it should be 0 ohms or no more than 1 ohms. The resistance above 1 ohm means that the ground wire has a problem and elb, elcb may not work. Last step: Connect three wires to a hot shower and everything will be finished. See the video below for the complete project.